Line Type Auxiliary Valves

Grid View:
-3%

TOGNELLA 1/4 Pressed Manometer Protection Valve

(0)
1,265.22 TL 1,304.41 TL

Line type flow adjustment valves.Different thread sizes are available.Pressure values ​​according to material type; It can vary between 210-400 bar...

-3%

TOGNELLA 1/4 90 ° Throttle Manometer Protection Valve

(0)
317.10 TL 326.99 TL

Line type flow adjustment valves.Different thread sizes are available.Pressure values ​​according to material type; It can vary between 210-400 bar...

-3%

TOGNELLA 1/4 Line Type Manometer Protection Valve

(0)
317.10 TL 326.99 TL

Line type flow adjustment valves.Different thread sizes are available.Pressure values ​​according to material type; It can vary between 210-400 bar...

-3%

TOGNELLA 2'' Steel Body Checked Speed ​​Regulating Valve

(0)
15,042.51 TL 15,508.06 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 11/2 Steel Body Checked Speed ​​Regulating Valve

(0)
7,872.00 TL 8,115.86 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 11/4 Steel Body Checked Speed ​​Regulating Valve

(0)
6,635.68 TL 6,841.14 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 1'' Steel Body Checked Speed ​​Regulating Valve

(0)
5,269.91 TL 5,433.01 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 3/4 Steel Body Checked Speed ​​Regulating Valve

(0)
2,568.84 TL 2,648.41 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 1/2 Steel Body Checked Speed ​​Regulating Valve

(0)
1,568.46 TL 1,617.16 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 3/8 Steel Body Checked Speed ​​Regulating Valve

(0)
1,241.47 TL 1,280.26 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 1/4 Steel Body Checked Speed ​​Regulating Valve

(0)
1,083.91 TL 1,117.56 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 1/8 Steel Body Checked Speed ​​Regulating Valve

(0)
1,251.76 TL 1,290.56 TL

The valves FT 257/5 have the function of regulating and, if necessary, to shut-off the flow in one direction, allowing a free flow in the opposite direction. Appreciated for their aesthetic characteristics that indulge positively the contructive directions of the equipments on which they are installed , they are also a reliable solution. The proper dimensioning has made possible to obtain, in a little space, a great mechanic resistance of the components. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the taper single-acting shutter valve. Like all the valves of the series FT 257 they ensure: • efficient metallic sealing; • flow linearity at the opening; • accurate control for a wide range of flow rate, thanks to the double reference system • wide range of the flow rate control; • impossibility for the needle to leave its seat even in the max. opening position; • stable positioning thanks to a screw inside the knob; ..

-3%

TOGNELLA 2'' Non-Slip Steel Body Speed ​​Regulating Valve

(0)
12,011.29 TL 12,383.01 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 11/2 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
6,969.80 TL 7,185.55 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 11/4 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
5,829.28 TL 6,009.80 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 1'' Non-Slip Steel Body Speed ​​Regulating Valve

(0)
4,288.53 TL 4,421.54 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 3/4 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
2,401.78 TL 2,476.21 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 1/2 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
1,415.65 TL 1,459.60 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 3/8 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
1,146.85 TL 1,182.48 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 1/4 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
944.17 TL 973.46 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 1/8 Non-Slip Steel Body Speed ​​Regulating Valve

(0)
1,007.90 TL 1,039.18 TL

The valves FT 257/2 allow flow control in both directions. They are equipped with a needle so to obtain: • efficient metallic seal; • flow linearity at the opening; • accurate regulation for a wide range of flow rate. The typical painted and FT ( standard ) serigraphed aluminium handwheel is equipped with a scale that, together with a keyed metal ring with graduated fractional scale, made up a double reference system to easily identify flow condition. A locking screw in the handwheel ensures stable flow values preventing accidental adjustments or movements due to vibrations and unwanted impacts. A ring nut (G) is used to carry out the panel mounting, on request...

-3%

TOGNELLA 3/4 Checked Speed ​​Regulating Valve Brass Body

(0)
2,211.37 TL 2,279.85 TL

The valves FT 1251/5-01 guarantee precise flow regulation in one direction and full free flow in opposite direction thanks to the equipment of single-acting unit with ball guide. They are an alternative to FT 257/5 where the working pressure does not exceed 210 bar or where ferrous materials cannot be used. They are ideal for use with fluids other than oil ( such as: air, gas, and liquids in general ). They have the same characteristics as the FT 257 series:  • efficient metallic sealing; • flow linearity at the opening; • simple setting of flow rates; • secure against accidental needle lift-out; • secure needle positio; • panel mounting provision, for which special lock nuts (G) are is supplied on reques..

-3%

TOGNELLA 1/2 Checked Speed ​​Regulating Valve Brass Body

(0)
1,306.39 TL 1,350.33 TL

The valves FT 1251/5-01 guarantee precise flow regulation in one direction and full free flow in opposite direction thanks to the equipment of single-acting unit with ball guide. They are an alternative to FT 257/5 where the working pressure does not exceed 210 bar or where ferrous materials cannot be used. They are ideal for use with fluids other than oil ( such as: air, gas, and liquids in general ). They have the same characteristics as the FT 257 series:  • efficient metallic sealing; • flow linearity at the opening; • simple setting of flow rates; • secure against accidental needle lift-out; • secure needle positio; • panel mounting provision, for which special lock nuts (G) are is supplied on reques..

Showing 1 to 25 of 38 (2 Pages)